Installation
37
User Manual
Figure 34: Cables within the Rail
Step 4.
While holding the cables stably together in the blade’s rail with one hand, use your other
hand to secure the blades to the chassis. Screw the right blade with eight 4-40 flathead
screws, and the left blade with seven 4-40 flathead screws. The recommended torque is
0.49-0.54 Nm.
In the next you will be attaching the rails to the chassis, before doing that, make sure
the cables are laid properly within them. Avoid using excessive pressure, as it can
damage the cables.
