CAUTION:
Be sure to tighten each heatsink nut fully in the order indicated. Otherwise, boot
failure or intermittent shutdowns might occur.
c.
Using a T-30 Torx screwdriver, tighten the nuts until they stop.
3.
Install all components removed from the failed system board.
Be sure to install the DIMMs in the same DIMM slots as the failed system board.
4.
Do the following:
Removal and replacement procedures
61
Summary of Contents for ProLiant DX190r Gen10
Page 21: ...Customer self repair 21...
Page 22: ...22 Customer self repair...
Page 23: ...Customer self repair 23...
