8.
remove the M.2 SSD riser board
.
9.
disconnect the S100i SR Gen10 controller SATA X-cable
.
10. Remove the DIMMs from the system board
11.
Remove the processor heatsink assembly:
a.
Allow the heatsink to cool.
b.
Loosen the heatsink nuts in the order specified by the label on the heatsink.
c.
Lift the processor heatsink assembly and move it away from the system board.
d.
Turn the assembly over and place it on a work surface with the processor facing up.
e.
Install the dust cover.
12.
Remove the system board.
Removal and replacement procedures
59
Summary of Contents for ProLiant DX190r Gen10
Page 21: ...Customer self repair 21...
Page 22: ...22 Customer self repair...
Page 23: ...Customer self repair 23...
