HPE ProLiant DL360 Maintenance And Service Manual Download Page 229

Page: 229 / 283

NVDIMM Function LED patterns

For the purpose of this table, the NVDIMM-N LED operates as follows:

Solid indicates that the LED remains in the on state.

Flashing indicates that the LED is on for 2 seconds and off for 1 second.

Fast-flashing indicates that the LED is on for 300 ms and off for 300 ms.

State

Definition

NVDIMM-N Function LED

The restore operation is in progress.

Flashing

The restore operation is successful.

Solid or On

Erase is in progress.

Flashing

The erase operation is successful.

Solid or On

The NVDIMM-N is armed, and the NVDIMM-N is in normal operation.

Solid or On

The save operation is in progress.

Flashing

The NVDIMM-N finished saving and battery is still turned on (12 V still
powered).

Solid or On

The NVDIMM-N has an internal error or a firmware update is in
progress. For more information about an NVDIMM-N internal error, see
the IML.

Fast-flashing

NVDIMM Function LED patterns

229

Summary of Contents for ProLiant DL360




























































































































































































































































































Search results

Summary of Contents for ProLiant DL360

Reviews:

Related manuals for ProLiant DL360

Brands by name

Popular brands

HPE ProLiant DL360, Maintenance And Service Manual

Search results

Summary of Contents for ProLiant DL360

Reviews:

Related manuals for ProLiant DL360

Brands by name

Popular brands