HPE ProLiant DL360, Maintenance And Service Manual

Page: 173 / 283

To replace the component:
1. Install the spare system board.
2. Install all components removed from the failed system board.
Be sure to install the DIMMs and persistent memory modules in the same DIMM slots as the failed system board.
3. Install the access panel.
4. Install the power supplies.
5. Power up the server.
6. Review the persistent memory configuration of the server.
For more information, see Configuring the server for Intel Optane persistent memory 100 series for HPE.
7. Do one of the following:
If persistent memory modules are encrypted with local key management, either manually enter the persistent memory module
passwords in the System Utilities or import the password file from the USB key.
If persistent memory modules are encrypted with remote key management, enroll the server iLO in the key management server
to provide access to the data on the persistent memory modules.
For more information, see the Intel Optane persistent memory 100 series for HPE User Guide on the Hewlett Packard Enterprise
website (https://www.hpe.com/info/persistentmemory-docs
https://www.hpe.com/info/persistentmemory-docs).
After you replace the system board, you must re-enter the server serial number and the product ID:
1. During the server startup sequence, press the
key to access UEFI System Utilities.
2. Select System Configuration > BIOS/Platform Configuration (RBSU) > Advanced Options > Advanced System ROM Options > Serial
Number, and then press the
key.
3. Enter the serial number and press the
F9
Enter
Enter
Removing and replacing the system board 173