manualshive.com logo in svg

HP ZBook Studio G4, Maintenance And Service Manual

The HP ZBook Studio G4 Maintenance and Service Manual is a comprehensive guide for troubleshooting and maintaining your powerful workstation. This essential manual can be easily downloaded for free from our website, ensuring you have all the information you need to keep your device running smoothly.

Share
Download
background image

Display cable

Description

Spare part number

Display cable

840938-001

eDP bracket (included in Bracket Kit, spare part number 840966-001)

840966-001 (Bracket Kit)

Before removing the display cable, follow these steps:

1.

Turn off the computer. If you are unsure whether the computer is off or in Hibernation, turn the 
computer on, and then shut it down through the operating system.

2.

Disconnect the power from the computer by unplugging the power cord from the computer.

3.

Disconnect all external devices from the computer.

4.

Remove the bottom cover (see 

Bottom cover on page 29

).

5.

Disconnect the battery cable from the system board (see 

Battery on page 41

).

Remove the display cable:

1.

Remove the two Phillips PM2.0×3.0 screws (1) that secure the display cable to the computer.

2.

Lift the eDP bracket from atop the connector (2).

3.

Disconnect the cable from the system board (3).

4.

Remove the cable from the clips along its routing path (4).

Reverse this procedure to install the display cable.

Component replacement procedures

45

Summary of Contents for ZBook Studio G4























































































































































































Reviews:

No comments

Related manuals for ZBook Studio G4

Velleman VTSDIR User Manual preview
VTSDIR
Brand: Velleman Pages: 12
jbc DDSE-9C Instruction Manual preview
DDSE-9C
Brand: jbc Pages: 12

Brands by name

Popular brands

Load more brands