manualshive.com logo in svg

HP ZBook Studio G4, Maintenance And Service Manual

The HP ZBook Studio G4 Maintenance and Service Manual is a comprehensive guide for troubleshooting and maintaining your powerful workstation. This essential manual can be easily downloaded for free from our website, ensuring you have all the information you need to keep your device running smoothly.

Share
Download
background image

Fingerprint reader board

Description

Spare part number

Fingerprint reader board (includes bracket)

840952-001

Before removing the fingerprint reader board, follow these steps:

1.

Turn off the computer. If you are unsure whether the computer is off or in Hibernation, turn the 
computer on, and then shut it down through the operating system.

2.

Disconnect the power from the computer by unplugging the power cord from the computer.

3.

Disconnect all external devices from the computer.

4.

Remove the bottom cover (see 

Bottom cover on page 29

).

5.

Remove the battery (see 

Battery on page 41

).

Remove the fingerprint reader board:

1.

Disconnect the cable from the system board (1).

2.

Slide the bracket downward to disengage it from the computer (2).

3.

Lift the bracket off the fingerprint reader (3).

4.

Lift the tape from atop the fingerprint reader (4).

5.

Remove the fingerprint reader from the computer (5).

Reverse this procedure to install the fingerprint reader board.

42

Chapter 5   Removal and replacement procedures for authorized service provider parts

Summary of Contents for ZBook Studio G4























































































































































































Reviews:

No comments

Related manuals for ZBook Studio G4

Xytronic HOT AIR 852D Instruction Manual preview
HOT AIR 852D
Brand: Xytronic Pages: 4

Brands by name

Popular brands

Load more brands