manualshive.com logo in svg

HP ZBook Studio G4, Maintenance And Service Manual

The HP ZBook Studio G4 Maintenance and Service Manual is a comprehensive guide for troubleshooting and maintaining your powerful workstation. This essential manual can be easily downloaded for free from our website, ensuring you have all the information you need to keep your device running smoothly.

Share
Download
background image

Mechanical

Fan error message - 90B

 

 

Symptoms

Fan error 90B at boot

CAUTION:

May lead to system 

shutdown, data loss or possible system 
damage.

Possible causes

Defective fan; out-of-date BIOS.

●

The system fan is not spinning or not spinning properly (loose connection, fan is stuck 
or defective).

●

The temperature inside the case is too high, and the fan cannot spin fast enough to 
remove the heat due to an obstruction to air flow.

Troubleshooting steps

General actions

1.

Update BIOS and drivers (

4. Update BIOS and drivers on page 68

) or reset BIOS to 

default. BIOS may implement new fan characteristics and updates for other 
components.

2.

Perform a hard reset (

8. Hard reset on page 78

). Performing a hard reset can reset 

recorded thermal values in memory.

 

Thermal-related issue

1.

Verify thermal condition:

a.

Check fan and connection. Reseat fan cable.

b.

Be sure that no obstructions or dust are in heat sink fan, fin, or vent.

c.

Test fan using HP PC Hardware Diagnostics (UEFI) tool (

6. HP Hardware 

Diagnostics and Tools on page 69

). Be sure that the fan is not producing loud 

noise and that fan blades spin correctly.

d.

Test with a verified working fan.

e.

Remove old thermal compound and pads, and replace properly with new pads.

2.

Verify thermal solution

▲

Use Thermal Monitor tool (available only to authorized service providers/
technicians) to run stress test (processor and GPU) and verify that thermal 
sensors are within limits after thermal condition is serviced.

Note

BIOS currently omits fan presence detection to shorten boot time delay less than four 
seconds. Therefore, the fan error is generated based on previous boot to operating system 
that found system fan error.

Fan often is part of thermal solution, including heat sink, fin/ muffler, and thermal grease. 
Fan replacement requires reboot and fan function verification using HP PC Hardware 
Diagnostics (UEFI) tool.

Common issues and possible solutions 123

Summary of Contents for ZBook Studio G4























































































































































































Reviews:

No comments

Related manuals for ZBook Studio G4

Brands by name

Popular brands

Load more brands