HP Workstation x2000, Getting Started Manual, Page: 56 / 76

Troubleshooting Your Workstation
Using HP MaxiLife to Diagnose Problems
Chapter 3 56
Using HP MaxiLife to Diagnose Problems
Your HP MaxiLife LCD Status Panel can help you to diagnose problems
with your Workstation, even when you are unable to get your system and
monitor working properly. It also provides system information you may
need to obtain support.
Figure 3-1 MaxiLife Status Panel
Press one of the LCD control buttons to display the menu. Use the scroll
button to scroll through the menu items, then use the select button to
select the item required. For more information on how to use the
MaxiLife display, refer to the x2000 Technical Reference manual provided
on the HP Workstations web page at
www.hp.com/workstations/suppor
t
Pre-Boot Check Error Messages
When you press your Workstation’s on/off button, HP MaxiLife checks
your system before it initiates the start-up sequence. The pre-boot
diagnostic tests are run in order of priority with respect to their
importance to computer functions. The first detected error displays a
message on the LCD status panel. If this happens, one of the following
error messages could appear.
NOTE Refer to the x2000 Technical Reference Manual (at
www.hp.com/workstations/support
) for information on how to access the
internal components of the Workstation.
Power On/Off Button
Reset Button
LCD Select Button
Hard Disk Activity Light
LCD Scroll Button