HP Workstation x2000, Getting Started Manual, Page: 44 / 76

44 Chapter 2
Linux System Setup and Recovery
Configuring Your Linux Workstation
Summary
This completes the miscellaneous parameters you can set from the Linux
Setup Tool window. If you want to erase the changes you have made and
keep the current configuration settings, click on the “Reset
Configuration” button. To see the parameters you have chosen, click on
the “Show Summary” button.
The “Show Summary” window, shown below, contains all the information
you entered. To change any choices, click OK to close the Show summary
window, and click the appropriate parameter box in the Linux Setup Tool
window.
Click “OK” to close this window.
If you are satisfied with all the information you have entered, click
“Save” at the bottom of the Linux Setup Tool window to save this
configuration. NOTE: The system will not let you exit until you have set
the root password.