HP Workstation x2000, Getting Started Manual, Page: 46 / 76

46 Chapter 2
Linux System Setup and Recovery
Recovering Your Linux System
From this prompt, you can use the following commands:
NOTE The
man
command is not available in rescue mode. Make sure you know
how to use all the above commands before you use rescue mode.
If your root filesystem is undamaged, you can mount it and then run any
Table 2-1 Linux Commands
anaconda gzip mke2fs.ext2 ps
badblocks head mknod python
bash hwclock mkraid python1.5
cat ifconfig mkswap raidstart
chatter init mlabel raidstop
chmod insmod mmd rcp
chroot less mmount rlogin
clock ln mmove rm
collage loader modprobe rmmod
cp ls mount route
cpio lsattr mpartition rpm
dd lsmod mrd rsh
ddcprobe mattrib mread sed
depmode mbadblocks mren sh
df mcd mshowfat sync
e2fsck mcopy mt tac
fdisk mdel mtools tail
fsck mdeltree mtype tar
fsck.ext2 mdir mv touch
ftp mdu mzip traceroute
genhdlist mformat open umount
gnome-pty-helper minfo pico uncpio
grep mkdir ping uniq
gunzip mke2fs probe zcat