HP Vectra VL800, Technical Reference Manual

Page: 86 / 147

86
4 Interface Cards
Network Cards
INTEL NIC (Network Interconnect) LAN Card
INTEL NIC LAN Card Features
INTEL NIC LAN Card LED Descriptions
Feature Description
Interface
IEEE802.3 100 Base-TX
IEEE802.3 10 Base-T
32-bit 10/100 BT full duplex RJ LAN Port
LED
Two LEDs:
•
one for act/lnk (activity and link)
•
one for 10 MB operation (on = 100 MB, off = 10MB).
Labels
PCI 2.2 Specification, PC 99.
Power Management •
Wfm 2.0 compliant
•
RPO and RWU for APM Windows 95 and Windows 98
•
OnNow 1.0, APM 1.2
•
PCI power management 1.1
•
VccAux s3.3 V support via PCI bus 2.2
•
VccAux 5 V support via 3-pin WOL.
Manageability
DMI 2.0 and DMI 2.0 SNMP mapper
Diagnostic •
Windows and DOS based
•
Mac address DOS report tool
•
User Diag for DOS, Windows NT 4, Windows 95 and Windows 98.
Drivers
Major OSes, Minor OSes
Boot ROM
Onboard flash ROM
Remote Wake Up
(RWU)
This feature enables a host computer to remotely (over the network) power
on computers and wake computers up from energy-saving Sleep mode. For
these features to work, use the Setup program to configure the BIOS.
LED On Flashing Off
ACT/LNK
Adapter and hub are
receiving power. Cable
connection is good. Receiving or sending
packets Adapter and hub are not
receiving power. Cable
connection could be faulty
or there is a driver
configuration problem.
100 TX
Operating at 100 Mbps N/A Operating at 10 Mbps