HP Vectra VL800, Technical Reference Manual

Page: 28 / 147

28
2 VL800 Minitower
Overview
Firmware - BIOS
Flash EEPROM: Intel’s Firmware hub concept
Operating System
Most models are preloaded with Windows 2000. Some models are preloaded
with Windows NT® 4.0.
Main Memory
2 pairs of RIMM sockets supporting 2 or 4 PC800 RDRAM memory modules.
Each pair of memory sockets must contain identical memory modules
(identical in size, speed and type). That is, sockets
A1
and
B1
must contain
identical modules, and sockets A AA A2222 and B BB B2222 must contain identical modules (or
continuity modules).
If only two RDRAM modules are installed, use the sockets marked A AA A1111 and
B BB B1111. The other two sockets (A AA A2222 and B BB B2222) must contain continuity modules
Models are supplied with non-ECC RDRAM modules.
Both ECC and non-ECC modules are available.
Up-to-date memory upgrades are listed on the HP PC Accessories website at:
www.hp.com/go/pcaccessories
Mass Storage
Five mass storage shelves supporting:
•
One front-access, third-height, floppy disk drive
•
Three front-access, half-height, 5.25-inch drives
•
Two internal 3.5-inch hard disk drives (one full-height, one half-height).
Optional SCSI Controller
LSI Logic Ultra 160 SCSI PCI card
IDE Controller
All models include an integrated Ultra ATA-100 controller that supports up to
four IDE devices
Graphics Controllers •
nVidia GeForce2 GTS AGP graphics controller with 32 MB graphics memory
•
Matrox Millennium G450-Dual monitor AGP graphics controller with 16 MB
SGRAM graphics memory.
Accessory Card Slots
One AGP (Accelerated Graphics Port) 4x 32-bit slot supporting standard 1.5V
AGP cards (
≤
25 W) only.
Hardware protection prevents any 3.3V AGP cards from being used.
Five 32-bit 33 MHz PCI (Peripheral Component Interconnect) slots supporting
all bridges and multi-function PCI devices. All five PCI slots comply with the
PCI Specification 2.2.
PCI slot 5 contains a LAN interface board.
Feature Description