HP Vectra VL800, Technical Reference Manual, Page: 105 / 147

105
6 HP BIOS
Using the HP Setup Program
Using the HP Setup Program
To run the Setup program, press
F2
while the initial HP logo is displayed,
immediately after restarting the PC.
Alternatively, press
Esc
to view the summary configuration screen. By
default, this remains on the screen for 15 seconds, but pressing any key will
override this delay. It is not possible to hold the summary configuration
screen indefinitely on the screen.
The following menus appear at the top of the screen: Main, Advanced,
Security, Boot, Power and Exit. These are selected using the left and right
arrow keys.
The following screens are examples of a BIOS configuration.
Main Screen
The Main Screen presents a list of fields. To change a value press either the
or keys.
PhoenixBIOS Setup Utility
Main Advanced Security Boot Power Exit
Item-Specific Help
BIOS Version: IQ.01.06 .
PnP OS [No]
Reset Configuration Data: [No]
System Time: [14:42:33]
System Date: [02/08/2000]
Key Click: [Disabled]
Keyboard auto-repeat rate
speed: [21.8 per Second]
Delay before auto-repeat: [0.50 Second]
Numlock at Power-on: [On]
F1 Help
‚
Select Item
F7/
F8
Change Values F9
Setup
Defaults
ESC Exit Select Menu
Ente
r
Select > Sub-Menu F10
Previous
Values