116
6 HP BIOS
Clearing the CMOS
Clearing the CMOS
1
Turn off the PC, disconnect the power cord and all cables, then remove
the cover.
2
Set the system board switch
8
to the
ON
position.
3
Replace the cover, and reconnect the power cord and video cable.
4
Reboot the PC. A message similar to the following will be
displayed:
“Configuration has been cleared, set switch Clear to the ON position
before rebooting.”
5
Turn off the PC, disconnect the power cord and video cable, and remove
the cover.
6
Set the system board switch
8
to the
OFF
position.
7
Replace the cover, and reconnect the power cord and data cables.
8
Switch on the PC. Run the
Setup
program by pressing
F2
. Then press
F9
,
the CMOS default values will be automatically downloaded and saved.
9
Press
Esc
to save the configuration and exit from the
Setup
program.
Summary of Contents for Vectra VL800
