HP Vectra VL800 Technical Reference Manual Download Page 29

Page: 29 / 147

2 VL800 Minitower

Overview

LAN Card

All models are supplied with an HP 10/100BT PCI Ethernet Adapter LAN card
installed in PCI slot 5, supporting Wake-On LAN (WOL) and PCI 2.2
Specification.

Optical Drive

Models have one of these optical drives:

❒

IDE 48X CD-ROM

❒

IDE 8X 4X 32X CD-RW drive

❒

IDE 12X DVD drive.

Standard Audio

CrystalClear™ CS4299 Audio Codec 97 version 2.1 integrated on the system
board.

Optional Audio

Creative Labs Sound Blaster Live! audio card

Loudspeaker

Optional in Minitower models

System Board
Connectors:

•

One flexible disk drive connector

•

Two ATA-100 IDE connectors (for up to four IDE devices)

•

One CD-IN audio connector (for use with integrated audio)

•

Internal speaker connector (1 for Min 1 for Desktop)

•

WOL connector

•

Battery socket

•

Status panel connectors (1 for Min 1 for Desktop)

•

Main power supply connector

•

ATX 12V power connector

•

Main chassis fan connector

•

Processor fan connector

•

Chassis intrusion connectors (1 for Min 1 for Desktop).

Feature

Description

Summary of Contents for Vectra VL800




















































































































































Search results

Summary of Contents for Vectra VL800

Reviews:

HP Vectra VL800, Technical Reference Manual, Page: 29 / 147

Search results

Summary of Contents for Vectra VL800

Reviews: