HP Vectra VL800, Technical Reference Manual

Page: 135 / 147

135
7 Tests and Error Messages
Error Message Summary
Code # Cause / Symptom Displayed Message
0000h Any POST error that is not listed below System error
0010h CMOS Checksum error (if no Serial EEProm) Incorrect CMOS Checksum
0011h Date and Time (CMOS backed up from SE2P) Date and Time Lost
0012h PC configuration lost (both SE2P and CMOS lost) Incorrect PC Configuration
0020h Any POST error regarding an AT option ROM Option ROM Error
0040h Serial number corrupted (bad checksum or null #) Invalid PC Serial Number
0041 Product flag not initialized or bad Invalid Internal product type
0060h RPO initialization failure Remote Power On Error
0100h Keyboard stuck key Keyboard Error
0101h Keyboard self-test failure Keyboard Error
0102h Keyboard controller I/O access failure Keyboard Error
0103h Keyboard not connected Keyboard Error
0300h Floppy A: self-test failure Flexible Disk Drive A Error
0301h Floppy B: self-test failure Flexible Disk Drive B Error
0310h Floppy A: not detected (but configured in CMOS) Flexible Disk Drive Error
0311h Floppy B: not detected (but configured in CMOS) Flexible Disk Drive Error
0306h General failure on floppy controller Flexible Disk Drive Error
0400h CD-ROM test failure CD-ROM Error
0401h CD-ROM not detected (but configured in CMOS) CD-ROM Error
0500h General failure on HDD onboard primary ctrl IDE Device Error
0501h General failure on HDD onboard secondary ctrl IDE Device Error
0510h HDD # 0 self-test error IDE Device # 0 Error
0520h HDD # 0 not detected (but configured in CMOS) IDE Device # 0 Error
0521h HDD # 1 not detected (but configured in CMOS) IDE Device # 1 Error
0522h HDD # 2 not detected (but configured in CMOS) IDE Device # 2 Error
0523h HDD # 3 not detected (but configured in CMOS) IDE Device # 3 Error