HP V1905 Series Getting Started Manual Download Page 65

Page: 65 / 135

Figure 96

IP Based ACL Modify Page

NOTE:

The description of parameters in the page refers to

Defining IP Based ACL

Selects the ACL to be modified.

Selects the Rule to be modified.

Modifies the fields of the Rule.

Click

Apply

Removing IP Based ACL

The IP Based ACL Remove Page allows the network administrator to remove IP-based ACL or IP-based ACL

rules.
Click

Device



ACL



Based

ACL



Remove

. The IP Based ACL Remove Page opens.

Figure 97

IP Based ACL Remove Page

The IP Based ACL Remove Page contains the following fields:

Table 77

IP Based ACL Remove Page item description

Item Description

ACL Name

Selects an IP-based ACL for removal.

Remove ACL

Enables the ACL to be removed.

To remove an IP-based ACL:

Select an ACL Name to be removed.

Check Remove ACL.

Click

Remove

Summary of Contents for V1905 Series








































































































































Search results

Summary of Contents for V1905 Series

Reviews:

Related manuals for V1905 Series

Brands by name

Popular brands

HP V1905 Series, Getting Started Manual

Search results

Summary of Contents for V1905 Series

Reviews:

Related manuals for V1905 Series

Brands by name

Popular brands