HP V1905 Series Getting Started Manual Download Page 61

Page: 61 / 135

Click

Apply

Removing MAC Based ACL

The MAC Based ACL Remove Page allows the network administrator to remove MAC-based ACL or
MAC-based ACL rules.
Click

Device



ACL



MAC

Based

ACL



Remove

. The MAC Based ACL Remove Page opens.

Figure 93

MAC Based ACL Remove Page

The MAC Based ACL Remove Page contains the following fields:

Table 74

MAC Based ACL Remove Page item description

Item Description

ACL Name

Selects a MAC-based ACL for removal.

Remove ACL

Enables the ACL to be removed.

To remove MAC-based ACL:

Select the ACL Name to be removed

Check Remove ACL.

Click

Remove

To remove MAC-based ACL rules:

Select the ACL Name containing the rules to be deleted.

For each rule to be removed, check the box to the left of the row in the rules table. To remove all rules,
the topmost box may be checked.

Click

Remove

Viewing MAC Based ACL

The MAC Based ACL Summary Page displays information regarding MAC Based ACL configured on the
switch.
Click

Device



ACL



MAC

Based

ACL

. The MAC Based ACL Summary Page opens.

Summary of Contents for V1905 Series








































































































































Search results

Summary of Contents for V1905 Series

Reviews:

Related manuals for V1905 Series

Brands by name

Popular brands

HP V1905 Series, Getting Started Manual

Search results

Summary of Contents for V1905 Series

Reviews:

Related manuals for V1905 Series

Brands by name

Popular brands