manualshive.com logo in svg

HP TR3271, Programming Manual

The HP TR3271 Programming Manual is a comprehensive guide designed to assist users in operating and programming their TR3271 model effortlessly. This user-friendly manual can be downloaded for free, exclusively from our website, providing step-by-step instructions and invaluable insights to optimize your product experience.

Share
Download
background image

TR3271 EVENT MANAGEMENT
67: ZTR3-EVT-SUBDEV-ERR

Event-Message Text

In the text message, 

ldev corresponds to the value of ZEMS-TKN-

LDEV, 

ldevname corresponds to the value of ZEMS-TKN-LDEVNAME, ddd

corresponds to the value of ZTR3-TKN-SU, and 

file-err corresponds

to the value of ZTR3-TKN-FILE-ERR.

Probable Cause

An operation or a request to the indicated TR3271 subdevice is
incorrect.  The value 

ldev identifies the TR3271 line, the value

ddd identifies the subdevice, and the value file-err identifies
the file-system error number.

Recommended Action

Appropriate recovery action depends on the file-system error
that occurred.  For information on file-system errors and how
to recover from them, refer to the 

System Procedure Errors and

Messages Manual.

If you cannot recover from the error, bring down the subdevice.

7-23

Summary of Contents for TR3271














































































































































































































































































































Reviews:

No comments

Related manuals for TR3271

Samsung CLX 6210FX - Color Laser - All-in-One Admin Manual preview
CLX 6210FX - Color Laser - All-in-One
Brand: Samsung Pages: 65
Samsung 4116 - SCX B/W Laser Driver Manual preview
4116 - SCX B/W Laser
Brand: Samsung Pages: 16
KAPERSKY ANTI-VIRUS BUSINESS OPTIMAL Manual preview
ANTI-VIRUS BUSINESS OPTIMAL
Brand: KAPERSKY Pages: 31
Vaisala Veriteq viewLinc 4.0 Administrator'S Manual preview
Veriteq viewLinc 4.0
Brand: Vaisala Pages: 168
SanDisk musicmatch User Manual preview
musicmatch
Brand: SanDisk Pages: 11
Yellowtec b-line Manual preview
b-line
Brand: Yellowtec Pages: 124
Omron CX_PROFIBUS Brochure preview
CX_PROFIBUS
Brand: Omron Pages: 2
Autodesk 12812-051462-9011 - 3DS MAX 9 COM LEGACY SLM Help File preview
12812-051462-9011 - 3DS MAX 9 COM LEGACY SLM
Brand: Autodesk Pages: 2577
Panasonic LightPen3 Operating Instructions Manual preview
LightPen3
Brand: Panasonic Pages: 27
Panasonic LUMIX Simple Viewer Operating Instructions Manual preview
LUMIX Simple Viewer
Brand: Panasonic Pages: 32
VMware CLOUD DIRECTOR 1.0 Using preview
CLOUD DIRECTOR 1.0
Brand: VMware Pages: 3
VMware VmWare ESX Server 2.12 Deployment Deployment Manual preview
VmWare ESX Server 2.12 Deployment
Brand: VMware Pages: 34
VMware VCM 5.3 Manual preview
VCM 5.3
Brand: VMware Pages: 34
Creative Platinum eX User Manual preview
Platinum eX
Brand: Creative Pages: 84
AVG ANTI-VIRUS 9 FREE - REV 90.15 User Manual preview
ANTI-VIRUS 9 FREE - REV 90.15
Brand: AVG Pages: 146
Symantec ALTIRIS DEPLOYMENT SOLUTION 7.1 - FOR DELL SERVERS V1.0 Manual preview
ALTIRIS DEPLOYMENT SOLUTION 7.1 - FOR DELL SERVERS V1.0
Brand: Symantec Pages: 47
GRASS VALLEY Concerto Instruction Manual preview
Concerto
Brand: GRASS VALLEY Pages: 174
Lowrance MapCreate 6 Install And Operation Instructions preview
MapCreate 6
Brand: Lowrance Pages: 76

Brands by name

Popular brands

Load more brands