manualshive.com logo in svg

HP TR3271, Programming Manual

Share
Download
HP TR3271 Programming Manual Download Page 170

COMMANDS AND RESPONSES
STATUS Command

ZCOM-TKN-OBJTYPE specifies the type of object that was queried.
This token can have the value ZCOM-OBJ-LINE or ZCOM-OBJ-SU.  This
token is described in "Data-Communications Standard Definitions"
in Section 5, "Common Definitions," and the 

Distributed Systems

Management Programming Manual.

ZSPI-TKN-ERRLIST indicates the beginning of an error list.  This
token is described in "SPI Standard Definitions" in Section 5 and
the 

Distributed Systems Management Programming Manual.

ZSPI-TKN-RETCODE specifies the return code for the command.  This
token is described in "SPI Standard Definitions" in Section 5
and the 

Distributed Systems Management (DSM) Programming Manual.

For details on the data-communications error numbers and their
associated error lists, see "Common Error Numbers and Error
Lists" in the 

Communications Management Programming Manual.  For

details on the TR3271 error numbers and their associated error
lists, see Appendix A in this manual.

The possible nonzero values of RETCODE in response to the STATUS
command are as follows:

ZCOM-ERR-EMPT-RSP (-33)
ZCOM-ERR-TKN-REQ (-29)
ZCOM-ERR-TKN-DUP (-27)
ZCOM-ERR-TKN-CODE-INV (-26)
ZCOM-ERR-SUB-NOT-FOUND (-25)
ZCOM-ERR-SSID-INV (-24)
ZCOM-ERR-OBJNAME-INV (-19)
ZCOM-ERR-OBJ-NOT-SUPP (-18)
ZCOM-ERR-OBJ-NOT-FOUND (-17)
ZCOM-ERR-NO-MEM-SPACE (-14)
ZCOM-ERR-FNAME-INV (-9)
ZCOM-ERR-CMD-TIMED-OUT (-7)

ZCOM-ERR-TKN-VAL-INV (-30)

Your management application specified the SUB modifier with
the value ZCOM-VAL-SUB-ONLY for the SU object.  The SU object
accepts only the value ZCOM-VAL-SUB-NONE or ZCOM-VAL-SUB-ALL
for the SUB modifier.

ZCOM-ERR-CMD-MISMATCH (-4)

Your management application tried to inquire about a process
by using the value ZCOM-OBJ-PROC.  The command is valid only
for the values ZCOM-OBJ-LINE or ZCOM-OBJ-SU.

6-106

Summary of Contents for TR3271














































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands