Chapter 9
Troubleshooting
82
View Rotated
90 Degrees CCW
Figure 9-3. Battery on System Board
9. Insert the new battery with the positive sign (+) facing up in the socket.
10. Press down on the center of the battery with your thumb, pushing the battery
down into the socket.
The battery should snap into place.
11. Ensure the spring latch holds the battery firmly.
12. If necessary, replace the SCSI cable and replace the left side cover.
13. Power on the Server and reset the BIOS (CMOS) settings.
Problems Running the Setup Utility
If you cannot run the Setup Utility, the HP Server's configuration in CMOS
memory may have been corrupted. The only way to recover from a corrupted
configuration is to clear it. Refer to "Clearing the CMOS Configuration," earlier in
this chapter and reset the BIOS configuration.
