manualshive.com logo in svg

HP t820, Maintenance & Service Manual

Share
Download
HP t820 Maintenance & Service Manual Download Page 95

A BIOS upgrade option is available through both the Startup Menu and the F10 Setup utility using the

"Flash System ROM" feature.

1.

Reboot the computer and press the 

Esc

 key to display the Startup Menu.

2.

Use the arrow keys to select 

Utilities

, and then select the 

Flash System ROM

 option.

1.

Alternatively, reboot the PC and press 

F10

 to access the BIOS Setup utility.

2.

In the 

File

 menu, select 

Flash System ROM

.

Either method requires that removable media be present that contains the BIOS binary image file in the

root directory. You can find the binary image file in the DOS Flash folder. The image is named

xxx_MMmm.bin, where "xxx" is the BIOS family, "MM" is the major version number, and "mm" is the

minor version number. To create a CD for updating the BIOS, use a blank CD-R or CD-RW disk on a

system with a CD-RW or DVD+RW drive, and write the binary to the disk using any CD-burning

software. If a BIOS Setup password is set, the password is required before you can access the 

Flash

System ROM

 menu. You are notified when the process completes. The new BIOS code will not take

effect until you restart the PC.

USB Device BIOS Flashing in DOS

DOS Flash (DOSFlash.exe, FlshUefi.cpu) is the DOS-compatible System BIOS flash utility that you can

use from a DOS bootable storage device (where "DOS" refers to any of a number of compatible

operating systems such as FreeDOS, MS-DOS or DR-DOS). FlshUefi.cpu is the required driver for

DOSFlash.exe. To flash the System BIOS from a bootable USB storage device, copy the contents of the

DOS Flash folder to the USB device, boot the computer from the USB device, and execute the

DOSFlash application.

To see a more complete description of the DOS flash utilities, view DOSFlash.txt located in the DOS

Flash folder of the SoftPaq. This folder also contains the required binary image of the BIOS. The binary

image file is named xxx_MMmm.bin where "xxx" is the BIOS family, "MM" is the major version

number, and "mm" is the minor version number. You can copy this file to the root directory of any USB

removable medium for use with the F10 setup "Flash System ROM" option or BootBlock Emergency

Recovery Mode.

System Software Management (SSM) BIOS Flashing

Use this SoftPaq with System Software Manager (SSM) to update the System BIOS on target computers

on a network. Place this SoftPaq in your SSM Filestore folder and then update the database. SSM is a

free utility provided by Hewlett-Packard Company. For information on SSM, see 

http://www.hp.com/

go/ssm

.

HP Client Manager Software (HPCMS) BIOS Flashing

Use this Softpaq with HP Client Manager Software (HPCMS) and Altiris Notification Server to remotely

target, distribute, and update the System BIOS on network PCs. Place this SoftPaq in your HPCMS

Filestore folder and then update the database. HPCMS is a free managment application provided by

Altiris and Hewlett-Packard Company. For more information, see 

http://www.hp.com/go/EasyDeploy

.

Network BIOS Flashing

We designed the DOS Flash utility to support System BIOS flashing from a remote network boot using

PXE. DOS Flash uses a small memory footprint that is compatible with the limited DOS memory

available and the DOS extended environment that may exist while running Altiris eXpress. To see a

Updating or restoring a BIOS

87

Summary of Contents for t820








































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands