Antennas
Two antennas are secured to chassis – one on the front, one on the back. You must remove all other
components to remove the antennas.
1.
Prepare the computer for disassembly (
Preparation for disassembly on page 17
).
2.
Remove the access panel (
Access panel on page 18
).
3.
Remove the front fan (
Front fan on page 25
).
4.
Remove the drive cage (
Drive cage (fiber NIC assembly holder) on page 34
).
5.
Remove the fiber NIC assembly (
Installing the fiber NIC assembly on page 37
).
6.
Remove the heat sink (
Heat sink on page 27
).
7.
Remove the system board (
System board on page 44
).
8.
Remove the rear fan (
Rear fan on page 47
).
9.
To remove the front antenna, from the inside of the front of the chassis, remove the antenna from
the clips built into the base pan.
10.
From the outside of the front of the chassis, remove the two Torx T8 screws
(1)
that secure the
antenna to the chassis.
Antennas
49
