Power switch
Description
Spare part number
Power switch
732767-001
1.
Prepare the computer for disassembly (
Preparation for disassembly on page 17
).
2.
Remove the access panel (
Access panel on page 18
).
3.
Remove the front bezel (
Front bezel on page 19
).
4.
Remove the drive cage (
Drive cage (fiber NIC assembly holder) on page 34
).
5.
Disconnect the power switch cable from the system board connector labeled PB/LED.
6.
Remove the power switch cable from atop the front I/O bracket.
7.
From the front of the computer, press down (or squeeze) on the top on the power switch
(1)
, and
then rotate it down
(2)
to disengage it from the chassis.
8.
Pull the power switch and cable assembly out through the hole in the front of the chassis.
To install the power switch, reverse the removal procedure.
Power switch
43
