Graphics board
Description
Spare part number
AMD Radeon HD 7650A 2GB MXM Graphics
708866-001
CAUTION:
Be very careful when removing or replacing the system board to prevent damaging it.
1.
Prepare the computer for disassembly (
Preparation for disassembly on page 17
).
2.
Remove the access panel (
Access panel on page 18
).
3.
Remove the drive cage (
Drive cage (fiber NIC assembly holder) on page 34
).
4.
Remove the two Torx T8 screws
(1)
that secure the graphics board to the system board, rotate the
board upward to a 45-degree angle
(2)
, and the pull it away from the system board connector
and out of the computer
(3)
.
NOTE:
Graphics card appearance may vary.
To install the graphics board, reverse the removal procedure.
If you need to remove the heat sink from the graphics board, loosen the four captive Torx screws that
secure the heat sink from the graphics board, and then lift the heat sink from the graphics board.
42
Chapter 4 Removal and replacement procedures
