manualshive.com logo in svg

HP T5135 - Compaq Thin Client, Troubleshooting Manual

Share
Download
HP T5135 - Compaq Thin Client Troubleshooting Manual Download Page 44

System Requirements

To create a recovery device for the purpose of reflashing or restoring the software image on the ROM,

you will need the following:

●

A personal computer running Microsoft Windows 2000 Professional or Microsoft Windows XP

Professional

●

One or more HP Compaq t5000 Series Thin Clients

●

CD-R or CD-RW drive (if using the ISO Image option)

●

USB flash device 64MB for Microsoft Windows CE or 512MB for Windows XP Embedded (if using

the USB format) or Linux. Compatible USB flash devices (drive keys) are available from

http://www.diskonkey.com

.

This restore method will not work with all USB flash devices.

USB flash devices with multiple partitions generally do not support this restore method. The range of

USB flash devices available on the market is constantly changing. Not all USB flash devices (drive

keys) have been tested with the HP Compaq Thin Client Imaging Tool.

●

USB CD-ROM drive for thin client (if using the ISO Image option)

Before using the utility, you must download the appropriate image from 

http://www.hp.com/products/

thinclientsoftware

.

38 Chapter 

4

   Restoring the Flash Image

ENWW

Summary of Contents for T5135 - Compaq Thin Client



















































































Reviews:

No comments

Brands by name

Popular brands

Load more brands