HP SureStore Optical 2600fx Command Reference Manual Download

Page: 54 / 378

SCSI-2 Drive Command Set

Format Unit Command (04H)

Chapter 2

2-17

SC
SI-
2

D
ri

ve
Co
m

Format Unit Command Defect List

The Format Unit command Defect List consists of the Defect List Header
and zero or more multi-byte Defect Descriptor(s).

FOV

A Format Options Valid bit of 1 indicates that the DCRT
(Disable Certification) and Immed (Immediate) fields
contain valid information.

A FOV bit of 0 indicates that the DCRT and Immed
fields do not contain valid information.

DCRT

A Disable Certification bit of 1 indicates the drive does
not certify the optical disk during the format process.

A DCRT bit of 0 indicates that the drive certifies the
optical disk during the format process.

When the FOV bit is set to 0, the DCRT bit must also be
set to 0.

DCRT does not apply to Write-Once disks.

Immed

When the Immediate bit is set to 1, it indicates a status
of GOOD is returned before the format operation is
begun.

An Immed bit of 0 indicates a GOOD status is returned
when the format is complete.

Defect List
Length

The Defect List Length is the total length in bytes of the
Defect Descriptors that follow.

Table 2-11

Format Unit Defect List Header

Byte

Reserved (0)

FOV

Rsvd

(0)

DCRT

Reserved (0)

Immed

Rsvd

(0)

Defect List Length (MSByte)

Defect List Length (LSByte)

Summary of Contents for SureStore Optical 2600fx


























































































































































































































































































































































































Search results

Summary of Contents for SureStore Optical 2600fx

Reviews:

Related manuals for SureStore Optical 2600fx

Brands by name

Popular brands

HP SureStore Optical 2600fx, Command Reference Manual

Search results

Summary of Contents for SureStore Optical 2600fx

Reviews:

Related manuals for SureStore Optical 2600fx

Brands by name

Popular brands