HP SureStore Optical 2600fx Command Reference Manual Download Page 233

Page: 233 / 378

Jukebox SCSI-2 Command Set

Read Buffer Command (3CH)

Chapter 3

3-46

Table 3-44

Drive Status Definition

Byte

Status

Description

Drive is not valid

Online_good

The drive is online and in a good
state. This is the normal state. All
accesses allowed.

Online_pending

The drive is offline and ready to go
to the "Online_good" state. No
accesses allowed.

Offline_failed

The drive is offline and in a failed
state. No accesses allowed. No power
is applied to the drive.

Offline_good_pending

The drive is online but requesting to
go the "Offline_good" state. All
accesses allowed.

Offline_good

The drive is offline but is not in a
failed state. No accesses allowed. No
power is applied to the drive.

Summary of Contents for SureStore Optical 2600fx


























































































































































































































































































































































































Search results

Summary of Contents for SureStore Optical 2600fx

Reviews:

Related manuals for SureStore Optical 2600fx

Brands by name

Popular brands

HP SureStore Optical 2600fx, Command Reference Manual

Search results

Summary of Contents for SureStore Optical 2600fx

Reviews:

Related manuals for SureStore Optical 2600fx

Brands by name

Popular brands