HP Surestore 160ex - Optical Jukebox Page 64 User Manual Download

Page: 64 / 120

3-30

Chapter 3

Operating the Jukebox

Running an Internal Test

EXERCISE MECH

Runs the VERTICAL TEST, TRANSLATE TEST,
FLIP TEST, MAGAZINE IO, DRIVE IO, and
MAILSLOT IO tests. Each test runs one time per test
loop.

WELLNESS TEST

Checks the general capability of the jukebox. Requires
one loaded disk. The drives, transport, and mailslot
must be empty. Runs

INIT MECHANICS

and

EXERCISE MECHANICS

Each test runs one time per

test loop.

CLEAR SOFT LOG

Sets the soft error log to zero.

CLEAR HARD
LOG

Sets the hard error log to zero.

PLUNGE FULL
SPD

Allows the disk transport mechanics to run at full
speed. This setting should always be used in normal
jukebox operation.

PLUNGE 1/2 SPD

Used by service personnel only.

Allows the disk

transport mechanics to run at half speed

PLUNGE 1/4 SPD

Used by service personnel only.

Allows the disk

transport mechanics to run at quarter speed.

STARWARS

The display shows

0 0 0

Each “

" indicates one of the paths that the disk

transport mechanism follows in front of each stack of
optical disks. If the path is clear, a “

” displays; if the

path is blocked (because of an optical disk that is not
inserted fully into its storage slot for example), an “

”

will be displayed. This display is automatically updated
if the status changes.

Test Name

Description

Summary of Contents for Surestore 160ex - Optical Jukebox

























































































































Search results

Summary of Contents for Surestore 160ex - Optical Jukebox

Reviews:

Related manuals for Surestore 160ex - Optical Jukebox

Brands by name

Popular brands

HP Surestore 160ex - Optical Jukebox, User Manual

Search results

Summary of Contents for Surestore 160ex - Optical Jukebox

Reviews:

Related manuals for Surestore 160ex - Optical Jukebox

Brands by name

Popular brands