manualshive.com logo in svg

HP Surestore 160ex - Optical Jukebox, User Manual

The HP Surestore 160ex - Optical Jukebox is a reliable storage solution for organizing and accessing large volumes of data. With our comprehensive and user-friendly Service Manual, users can easily operate and maintain the jukebox hassle-free. Download the manual for free at manualshive.com and unlock the full potential of this product.

Share
Download
background image

3-18

Chapter 3

 

Operating the Jukebox

Setting the SCSI IDs

If your host computer system does not support multiple types at the same ID and 
you want to use LUN mode, you must select different IDs for the jukebox controller 
(

JKBX ID #

) and the drives (

DRV #

). Tables in Appendix B show jukebox default 

settings and an example of setting the jukebox controller and drives to different IDs 
(one digit apart).

If another device ID is placed between the jukebox controller and the drives, 
problems can result. For this reason, the jukebox will not accept IDs for the jukebox 
controller and drives that are more than one digit apart. You will receive a 

CONFLICT

 message.

6. Press 

NEXT

 or 

PREV

 until the new ID that you want displays and then press 

ENTER

. 

If the jukebox is set to 

LUN MODE ON

, go to Step 8. Only one ID can be 

changed and the ID automatically updates when you press 

ENTER

. 

7. (If using basic SCSI addressing - LUN mode OFF) Press 

NEXT

 until 

UPDATE

 

displays, and then press 

ENTER

.

8.

UPDATE

 or 

WAIT FOR UPDATE 

and then 

ID’S SAVED

 displays briefly.

•

 If the new settings do not conflict with other SCSI IDs on the bus, 

SCSI 

ID’S

 displays. 

•

If the new settings conflict with other IDs on the SCSI bus, 

CONFLICT-ABORTED

 displays briefly and then 

VIEW ID’S

 displays. 

Any changes entered are lost, and you must repeat steps 3 through 6 to set a 
new ID.

NOTE

When in LUN mode:
If the new ID you choose results in the IDs for the jukebox controller and the drives 
being more than one digit apart, the jukebox displays CONFLICT and rejects the 
ID.

9.  Press 

CANCEL

 until 

READY

 displays.

CAUTION

Turning off the jukebox in the next step could cause data loss if not done correctly. 

Do not turn off power to the jukebox until you are sure the SCSI bus is inactive. 
Check your host system manuals for information about checking the SCSI bus 
status. If your computer is connected to a LAN, be sure to check with your system 
administrator before turning off power to the jukebox.

10.  Turn the jukebox OFF, then ON to save the IDs to the jukebox flash ROM.

Summary of Contents for Surestore 160ex - Optical Jukebox

























































































































Reviews:

No comments

Related manuals for Surestore 160ex - Optical Jukebox

HamiltonBuhl Juke24 Quick Start Manual preview
Juke24
Brand: HamiltonBuhl Pages: 2
Octave TouchTunes Allegro Installation Manual preview
TouchTunes Allegro
Brand: Octave Pages: 84

Brands by name

Popular brands

Load more brands