manualshive.com logo in svg

HP Surestore 160ex - Optical Jukebox, User Manual

The HP Surestore 160ex - Optical Jukebox is a reliable storage solution for organizing and accessing large volumes of data. With our comprehensive and user-friendly Service Manual, users can easily operate and maintain the jukebox hassle-free. Download the manual for free at manualshive.com and unlock the full potential of this product.

Share
Download
background image

1-12

Chapter 1

 

Setting Up the Jukebox

Connecting the Jukebox with Other SCSI Devices

Connecting the Jukebox with Other SCSI 
Devices

NOTE

Operating this jukebox with other peripherals on the same bus is supported, but not 
recommended.

In most circumstances, the recommended configuration for this jukebox is as the 
only device on a SCSI bus. However, your use of the jukebox may be such that other 
devices could be connected to the bus without a loss of performance.

It is possible to connect this jukebox on a bus with additional devices in different 
ways (depending on your model):

•

 a 2- or 4-drive jukebox using basic SCSI addressing or 

•

a 2- or 4-drive jukebox using logical unit numbering (LUN) addressing

Some issues that must be considered when connecting other devices on a bus with 
this jukebox, include the following:

•

How will the jukebox be used: archiving, backup, near-line storage? What 
performance must be maintained?

•

How will the other device under consideration be used? How much demand will 
it place on the bus?

•

Will you be have to mix “wide” and “narrow” devices on the bus? 

•

Are there devices on the internal part of the SCSI bus? 

•

Will you be using a single-endedinterface or a differential interface?

NOTE

Appendix B provides a brief overview of SCSI and the issues you must consider 
when placing other devices on the same bus with this jukebox. More extensive 
information and frequently asked questions are at the web site at

 

www.hp.com/isgsupport/optical/index.ht

ml

Summary of Contents for Surestore 160ex - Optical Jukebox

























































































































Reviews:

No comments

Related manuals for Surestore 160ex - Optical Jukebox

Brands by name

Popular brands

Load more brands