a.
Log on to the iLO4 GUI.
b.
Select the
Administration
Tab.
c.
Select
Licensing
and enter the recorded license key in the section marked
Enter License Activation
Key
.
13.
Use the StoreOnce GUI or StoreOnce CLI to check that the firmware on the new component is correct.
NOTE:
Note the output after running firmware upgrade. It will advise if you need a system reboot or a cold
reboot to install the new firmware revision successfully.
14.
After power-up, it is necessary to rewrite warranty serial numbers into BIOS. Contact HPE Support for
assistance in rewriting warranty serial numbers.
RBSU settings
Table 14: RBSU settings for HPE StoreOnce 3100 System
Top menu item
Sub menu 1
Sub menu 2
Current default
state
Change to–
Boot options
Boot Mode
UEFI Mode
Legacy BIOS mode
Power Management
Options
HP Power Profile
Balanced Power
and Performance
Maximum
performance
Advanced Options
Advanced System
ROM Option
Product ID
794750-B21
Thermal
configuration
Optimal Cooling
Increased cooling
Date and Time
Time (hh:mm:ss)
As appropriate
Time zone
UTC-07:00,
Mountain Time (US
& Canada)
As appropriate
BIOS Serial
Console and EMS
BIOS Serial
Console Port
Auto
Physical
USB Options
Embedded User
Partition
Disabled
Only if 'enabled' in
the first place
RBSU settings
49
