Running a system self test
The StoreOnce CLI command,
system confidencechecker
, runs a self-test on the system and produces
a report of any problems. It is good practice to run this command before and after maintenance activities.
Refer to the HPE StoreOnce System CLI Reference Guide for more information about using this command.
system confidencechecker runtest all
Confidence checks running. Checks will take maximum of 60 seconds. Please
wait...
###############################################################################
# #
# CONFIDENCE REPORT #
# #
###############################################################################
Report Date: Wed Nov 18 11:55:40 UTC 2015
Product ID: HPE StoreOnce 3540 System
Cluster S/N: XXXXXNNNNNNXX
Version: 3.14.0-1539.3
Test Type: all
### FILE SYSTEM REPORT ########################################################
File System Check:
[RESULT]
PASSED
### INTERNAL NETWORK REPORT ###################################################
Internal Network Check is supported only on HP StoreOnce multinode products.
### EXTERNAL NETWORK REPORT ###################################################
External Network Check:
[RESULT]
PASSED
### SAS CONFIGURATION REPORT ##################################################
Sas Configuration Check is supported only on HP StoreOnce multinode, 5500 and
4900 backup products.
### NOTE ######################################################################
For any warning or error messages in this report, please consult the
troubleshooting
section in the customer user guide and follow the steps to perform corrective
Running a system self test
39
