HP StoreAll 8800 Administrator'S Manual Download Page 146

Page: 146 / 167

Using HP MSA Disk Arrays

•

HP 2000 G2 Modular Smart Array Reference Guide

•

HP 2000 G2 Modular Smart Array CLI Reference Guide

•

HP P2000 G3 MSA System CLI Reference Guide

•

Online help for HP Storage Management Utility (SMU) and Command Line Interface (CLI)

To find these documents, go the Manuals page (

http://www.hp.com/support/manuals

) and select

storage

Disk Storage Systems

MSA Disk Arrays

HP 2000sa G2 Modular Smart Array

P2000 G3 MSA Array Systems

Obtaining spare parts

For the latest spare parts information, go to

http://partsurfer.hp.com

. Enter your product SKU

number to view a list of parts. If you do not have the SKU number, click the

Hierarchy

tab and

navigate to your product to view a list of SKUs.

HP websites

For additional information, see the following HP websites:

•

http://www.hp.com/go/StoreAll

•

http://www.hp.com

•

http://www.hp.com/go/storage

•

http://www.hp.com/service_locator

•

http://www.hp.com/support/manuals

•

http://www.hp.com/support/downloads

•

http://www.hp.com/storage/whitepapers

Rack stability

Rack stability protects personnel and equipment.

WARNING!

To reduce the risk of personal injury or damage to equipment:

•

Extend leveling jacks to the floor.

•

Ensure that the full weight of the rack rests on the leveling jacks.

•

Install stabilizing feet on the rack.

•

In multiple-rack installations, fasten racks together securely.

•

Extend only one rack component at a time. Racks can become unstable if more than one
component is extended.

Product warranties

For information about HP product warranties, see the warranty information website:

http://www.hp.com/go/storagewarranty

Subscription service

HP recommends that you register your product at the Subscriber's Choice for Business website:

http://www.hp.com/go/e-updates

After registering, you will receive email notification of product enhancements, new driver versions,
firmware updates, and other product resources.

146

Support and other resources

Summary of Contents for StoreAll 8800








































































































































































Search results

Summary of Contents for StoreAll 8800

Reviews:

Related manuals for StoreAll 8800

Brands by name

Popular brands

HP StoreAll 8800, Administrator'S Manual

Search results

Summary of Contents for StoreAll 8800

Reviews:

Related manuals for StoreAll 8800

Brands by name

Popular brands