3–2
MSL5000 Series Library User Guide
Library Configuration
Default Configuration Settings
For most applications, you do not have to change the default settings; however, if you
do need to change a configuration setting, use the instructions provided in the
following sections. If you are uncertain whether you need to change a setting, contact
your HP authorized service provider.
Configuration settings that might need to be changed include:
•
Setting a SCSI ID
•
Setting up a reserved slot
•
Setting up a network
Change configuration settings using the Graphical User Interface (GUI) touch screen.
For a complete description of how the GUI touch screen works, see Chapter 4,
“Operation.”
Setting a SCSI ID
Each tape drive installed in the library requires a unique SCSI ID. The information
provided in this section shows you how to set a SCSI ID.
To set a SCSI ID:
1. Turn the library on and wait until the Power-On Self Test (POST) completes and
the Status screen appears on the display.
2. Select the Menu option from the Status screen.
3. Enter the appropriate password. See the section on “Front Panel and Media
Security Locks” in Chapter 4 for instructions on how to set passwords.