manualshive.com logo in svg

HP STORAGEWORKS ALL-IN-ONE STORAGE SYSTEM, Installation Manual, Page: 80 / 106

Share
Download
HP STORAGEWORKS ALL-IN-ONE STORAGE SYSTEM Installation Manual Download Page 80

Manage firmware versions

80

Add a firmware version

The firmware version shipped with the Edge Switch is provided on the Edge Switch 2/24 

documentation CD. Subsequent firmware versions to upgrade the Edge Switch are provided to 

customers through the HP web site.

NOTE:

When adding a firmware version, follow procedural information in the release notes that 

accompany the firmware version. This information supplements information provided in this general 

procedure.

Use these steps to add an edge switch firmware version to the library stored on the HAFM 

appliance hard drive:

1.

Obtain the new firmware version from the HP web site:

NOTE:

The following path is subject to change.

a.

At the HAFM appliance or other personal computer (PC) with Internet access, open the HP 

web site. The uniform resource locator (URL) is 

http://www.hp.com/country/us/eng/storage.html

.

b.

Locate the 

Networked storage

 section of the Web page.

c.

Under 

Networked storage

, locate the 

By type

 subsection.

d.

Click 

SAN infrastructure

. The 

SAN infrastructure

 page appears.

e.

Locate the 

Fibre Channel Switches 

section.

f.

Go to the 

M-Series Fabric

 subsection and click 

Edge Switch 2/24

. The 

HP StorageWorks 

Edge Switch 2/24

 page appears.

g.

Locate the 

Product information

 section and click 

Software, firmware & drivers

. The 

specify 

operating system

 page for your product appears.

h.

Locate the 

select operating system

 section and click 

Cross operating system (BIOS, Firmware, 

Diagnostics, etc.)

. The 

download drivers and software

 page for the selected product 

appears.

i.

Locate the 

Firmware

 section and click 

download

 next to the firmware you want to download. 

The Windows Save As dialog box appears
Verify or correct the directory path specified in the Save in field and the file name specified 

in the File name field.

j.

Click 

Save

. The new firmware version is downloaded and saved to the HAFM appliance or 

PC hard drive.

2.

At the HAFM application’s physical map, right-click the product icon representing the switch for 

which a firmware version is to be added, then select 

Element Manager

 

from the pop-up menu. 

The application opens.

Summary of Contents for STORAGEWORKS ALL-IN-ONE STORAGE SYSTEM











































































































Reviews:

No comments