HP STORAGEWORKS ALL-IN-ONE STORAGE SYSTEM Page 5 Installation Manual Download

Page: 5 / 106

Edge Switch 2/24 installation guide

Configure SANtegrity authentication . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 59

Back up HAFM configuration data. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 60

Configure open systems management appliance . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 60

Configure feature key. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 61

Configure Open Trunking . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 61

Enable Embedded Web Server . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 61

Enable Telnet . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 61

Connect cables to Fibre Channel ports . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 61

Connect the switch to a fabric . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 62

Unpack, inspect, and install the ethernet hub (optional) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 63

Using HAFM from a remote location . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 64

Remote workstation minimum requirements . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 64

Install HAFM client on a remote workstation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 64

Launch HAFM from the remote client . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 65

3 Using the Embedded Web Server . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 67

Accessing the Embedded Web Server. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 67

Configure switch ports . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 68

Configure Switch Identification . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 70

Configure date and time. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 71

Configure switch and fabric parameters . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 71

Configure switch parameters . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 71

Set fabric parameters . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 73

Configure network information . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 74

Configure SNMP trap message recipients . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 76

Enable or disable the CLI. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 77

Configure user rights. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 78

4 Manage firmware versions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 79

Determine a switch firmware version. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 79

Add a firmware version. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 80

Modify a firmware version description . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 82

Delete a firmware version . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 82

Download a firmware version to a switch . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 83

Back up the configuration . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 85

A Regulatory compliance and safety . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 87

Regulatory compliance . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 87

Federal Communications Commission notice . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 87

Class A equipment . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 88

Class B equipment . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 88

Declaration of conformity for products marked with the FCC logo, United States only . . . . . 88

Modifications . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 88

Cables . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 89

Regulatory compliance identification numbers . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 89

Summary of Contents for STORAGEWORKS ALL-IN-ONE STORAGE SYSTEM











































































































Search results

Summary of Contents for STORAGEWORKS ALL-IN-ONE STORAGE SYSTEM

Reviews:

Related manuals for STORAGEWORKS ALL-IN-ONE STORAGE SYSTEM

Brands by name

Popular brands

HP STORAGEWORKS ALL-IN-ONE STORAGE SYSTEM, Installation Manual

Search results

Summary of Contents for STORAGEWORKS ALL-IN-ONE STORAGE SYSTEM

Reviews:

Related manuals for STORAGEWORKS ALL-IN-ONE STORAGE SYSTEM

Brands by name

Popular brands