Edge Switch 2/24 installation guide
41
2.
Right-click the switch icon at the HAFM application’s physical map. A pop-up menu appears.
3.
Select the
Element Manager
option from the pop-up menu. When the Element Manager
application opens, the last view (tab) accessed by a user opens by default. The example in
Figure 15
shows the Hardware View
.
Figure 15
Switch Hardware View page
4.
Inspect switch status at the Hardware View page and perform one of the following steps:
a.
If the switch displays operational (no FRU alert symbols and a green circle at the alert panel),
go to
”
Set switch date and time” on page 42
.
b.
If switch operation displays degraded or a switch failure is indicated (FRU alert symbols and
a yellow triangle or red diamond at the alert panel), refer to the
HP StorageWorks Edge
Switch 2/24 service manual
to isolate the problem.
Failed—Switch-to appliance communication is established, but the switch
failed and requires immediate service.
Go to
step 2
.
Status Unknown—The switch status is unknown because of a network
communication failure between the switch and HAFM appliance.
Go to
step 2
.
Table 3
Switch operational states and symbols
Operational State
Symbol
