Edge Switch 2/24 installation guide
57
6.
Enter a percentage from
1
through
100
for % utilization. When throughput reaches this
percentage of port capacity, a threshold alert will occur.
7.
Enter the amount of cumulative minutes in which the % utilization should exist during the
notification interval before an alert is generated. You can also select
At any time
if you want an
alert to occur whenever the set % utilization is reached. The valid range is from 1 to the interval
value set in
step 8
.
8.
Enter the interval in minutes in which throughput is measured and threshold notifications can
occur. The valid range is 5 minutes to 70,560 minutes.
9.
Click
Next
. A new screen is displayed for selecting ports for the alerts, as shown in
Figure 28
.
Figure 28
New Threshold Alerts dialog box
—
third screen
10.
Select either
Port Type
or
Port List
.
• For
Port Type
, select either
E_Ports
or
F_Ports
. This will cause this alert to generate for all
ports configured as E_Ports or F_Ports respectively.
• For
Port List
, you can select individual ports by clicking the check box by each port number
or set all ports. Selecting
Set All Ports
places a check mark by each port number. Selecting
Clear All Ports
will clear the check marks by each port number.
