HP StorageWorks 8/24 - SAN Switch, Hardware Reference Manual

Page: 45 / 110

1. Insert the switch with the attached inner rails into the outer rails.
NOTE:
This step applies to installing a switch in HP 9000 Series, HP 10000 Series, or HP System/e
racks.
2. Insert the device into the rack, and install one #10-32 x 1/2-inch Phillips pan-head screw with
captive star lock washer. Repeat for the remaining side. See
Figure 19 and Figure 20 .
Figure 19 Securing the switch (HP 9000 Series or HP 10000 Series Racks)
Figure 20 Securing the device in an HP System/e Rack
3. Tighten the hex nuts installed in Step 4 , page 40. See Figure 13 , page 40.
This completes the rack mount procedure.
Cabling and configuring the SAN Switch
The SAN Switch must be configured to ensure correct operation with a network and fabric. For
instructions on configuring the switch to operate in a fabric containing switches from other vendors,
see the
HP StorageWorks Fabric OS administrator guide .
8-Gb SAN Switch hardware reference manual 45