HP StorageWorks 2000fc - G2 Modular Smart Array User Manual Download Page 13

Page: 13 / 76

HP StorageWorks 2312fc and 2324fc Modular Smart Array user guide

Product warranties

For information about HP StorageWorks product warranties, see the warranty information website:

http://www.hp.com/go/storagewarranty

Subscription service

HP strongly recommends that customers sign up online using the Subscriber's choice web site:

http://www.hp.com/go/e-updates

•

Subscribing to this service provides you with e-mail updates on the latest product enhancements, newest

versions of drivers, and firmware documentation updates as well as instant access to numerous other

product resources.

•

After signing up, you can quickly locate your products by selecting

Business support

and then

Storage

under Product Category.

HP web sites

For other product information, see the following HP web sites:

•

http://www.hp.com

•

http://www.hp.com/go/storage

•

http://www.hp.com/support/

•

http://www.docs.hp.com

Documentation feedback

HP welcomes your feedback.
To make comments and suggestions about product documentation, please send a message to

[email protected]

. All submissions become the property of HP.

Summary of Contents for StorageWorks 2000fc - G2 Modular Smart Array













































































Search results

Summary of Contents for StorageWorks 2000fc - G2 Modular Smart Array

Reviews:

Related manuals for StorageWorks 2000fc - G2 Modular Smart Array

Brands by name

Popular brands

HP StorageWorks 2000fc - G2 Modular Smart Array, User Manual

Search results

Summary of Contents for StorageWorks 2000fc - G2 Modular Smart Array

Reviews:

Related manuals for StorageWorks 2000fc - G2 Modular Smart Array

Brands by name

Popular brands