HP StorageWorks 2000fc - G2 Modular Smart Array User Manual Download Page 63

Page: 63 / 76

HP StorageWorks 2312fc and 2324fc Modular Smart Array user guide

NOTE:

Connections to this device must be made with shielded cables with metallic RFI/EMI connector

hoods in order to maintain compliance with FCC Rules and Regulations.

Physical requirements

The floor space at the installation site must be strong enough to support the combined weight of the rack,

controller enclosures, expansion enclosures, and any additional equipment. The site also requires sufficient

space for installation, operation, and servicing the enclosures, and also requires sufficient ventilation to

allow a free flow of air to all enclosures.

Table 14

and

Table 15

list enclosure dimensions and weights. Weights are based on an enclosure having

12 drive modules, two controller or expansion modules, and two power supplies installed.

Environmental requirements

Table 14

Rackmount enclosure dimensions

Specifications

Rackmount

Height

2U 3.5 inches (8.9 cm)

Width:

•

Chassis

•

To back of power supply handle

21.8 inches (55.4 cm)
23.7 inches (60.2 cm)

Table 15

Rackmount enclosure weights

Specifications

Rackmount

2312fc Modular Smart Array

•

SAS drives

•

SATA drives

64.5 lb (29.3 kg)
65.5 lb (29.8 kg)

2324fc Modular Smart Array

•

SAS drives

•

SATA drives

58.5 lb (26.6 kg)
54.2 lb (24.6 kg)

MSA2000 3.5 12-drive enclosure (12

drives)

•

SAS drives

•

SATA drives

62 lb (28.2 kg)
63 lb (28.6 kg)

Table 16

Operating environmental specifications

Specification

Range

Altitude

To 9842 feet (3000 meters), derate 35.6ºF (2ºC)

for every 3281 feet (1 km) up to 9842 feet (3000

meters)

Relative humidity

10% to 90% RH, 104ºF (40ºC) non condensing

Temperature

41ºF to 104ºF (5ºC to 40ºC)

Shock

5.0 g, 10 ms, half-sine

Vibration

0.5 g, 1 octave/minute, 5 Hz to 500 Hz to 5

Hz, swept-sine

Summary of Contents for StorageWorks 2000fc - G2 Modular Smart Array













































































Search results

Summary of Contents for StorageWorks 2000fc - G2 Modular Smart Array

Reviews:

Related manuals for StorageWorks 2000fc - G2 Modular Smart Array

Brands by name

Popular brands

HP StorageWorks 2000fc - G2 Modular Smart Array, User Manual

Search results

Summary of Contents for StorageWorks 2000fc - G2 Modular Smart Array

Reviews:

Related manuals for StorageWorks 2000fc - G2 Modular Smart Array

Brands by name

Popular brands