HP StorageWorks 2000fc - G2 Modular Smart Array User Manual Download Page 70

Page: 70 / 76

Regulatory compliance and safety

BSMI notice

Japanese notice

Korean notices

Safety

Battery replacement notice

Your computer is equipped with a lithium manganese dioxide, a vanadium pentoxide, or an alkaline

internal battery or battery pack. There is a danger of explosion and risk of personal injury if the battery is

incorrectly replaced or mistreated. Replacement is to be done by an HP authorized service provider using

the HP spare part designated for this product. For more information about battery replacement or proper

disposal, contact an HP authorized reseller or HP authorized service provider.

Summary of Contents for StorageWorks 2000fc - G2 Modular Smart Array













































































Search results

Summary of Contents for StorageWorks 2000fc - G2 Modular Smart Array

Reviews:

Related manuals for StorageWorks 2000fc - G2 Modular Smart Array

Brands by name

Popular brands

HP StorageWorks 2000fc - G2 Modular Smart Array, User Manual

Search results

Summary of Contents for StorageWorks 2000fc - G2 Modular Smart Array

Reviews:

Related manuals for StorageWorks 2000fc - G2 Modular Smart Array

Brands by name

Popular brands