HP StorageWorks 2000fc - G2 Modular Smart Array User Manual Download Page 11

Page: 11 / 76

HP StorageWorks 2312fc and 2324fc Modular Smart Array user guide

About this guide

This guide provides information about the HP StorageWorks 2312fc Modular Smart Array and 2324fc

Modular Smart Array.

Intended audience

This guide is intended for use by system administrators and technicians who are experienced with the

following:

•

Direct attach storage (DAS) or storage area network (SAN) management

•

Network administration

•

Network installation

•

Storage system installation and configuration

Prerequisites

Prerequisites for installing and configuring this product include familiarity with:

•

Servers and computer networks

•

Fibre Channel and Ethernet protocols

Summary of Contents for StorageWorks 2000fc - G2 Modular Smart Array













































































Search results

Summary of Contents for StorageWorks 2000fc - G2 Modular Smart Array

Reviews:

Related manuals for StorageWorks 2000fc - G2 Modular Smart Array

Brands by name

Popular brands

HP StorageWorks 2000fc - G2 Modular Smart Array, User Manual

Search results

Summary of Contents for StorageWorks 2000fc - G2 Modular Smart Array

Reviews:

Related manuals for StorageWorks 2000fc - G2 Modular Smart Array

Brands by name

Popular brands