HP Spectre 13x2 Pro Maintenance And Service Manual Download Page 31

Page: 31 / 103

Sequential part number listing

Spare part number

Description

490371-021

Power cord for use in Europe (3-pin, black, 1.83-m)

490371-031

Power cord for use in the United Kingdom and Singapore (3-pin, black, 1.83-m)

490371-061

Power cord for use in Italy (3-pin, black, 1.83-m)

490371-081

Power cord for use in Denmark (3-pin, black, 1.83-m)

490371-111

Power cord for use in Switzerland (3-pin, black, 1.83-m)

701943-001

HP HDMI-to-VGA adapter

704031-006

HP lt4112 LTE/HSPA+ Gobi 4G Module

704927-001

HP RJ45-to-USB adapter

710661-006

Intel Dual Band Wireless-AC 7260 802.11 ac 2×2 WiFi + BT 4.0 Combo Adapter

717381-006

Intel Dual Band Wireless-N 7260AN 802.11a/b/g/n 2×2 WiFi + BT 4.0 Combo Adapter

717384-006

Intel Wireless-N 7260BN 802.11 b/g/n 2×2 WiFi + BT 4.0 Combo Adapter

721092-001

45-W HP Smart AC adapter (non-PFC, RC, 4.5-mm)

723895-006

HP lt4112 LTE/HPSA+ Mobile Broadband Module

723997-006

2-cell, 18-WHr, 2.45-AHr, Li-ion battery (for use only in the keyboard base, includes cable)

736879-001

Wireless Antenna Kit (includes left and right wireless antenna cables and transceivers)

736886-001

NFC module (includes double-sided adhesive)

NOTE:

The NFC module does not include the NFC module cable. The NFC module cable is included in the

Cable Kit, spare part number 742103-001. See

Cable Kit on page 21

for more Cable Kit spare part

information.

736887-001

Audio/power connector board (includes audio jack and power connector)

NOTE:

The audio/power connector board does not include the audio/power connector board cable. The

audio/power connector board cable is included in the Cable Kit, spare part number 742103-001. See

Cable Kit on page 21

for more Cable Kit spare part information.

736888-001

Docking connector board (includes docking port/power connector)

NOTE:

The docking connector board does not include the docking connector board cable. The docking

connector board cable is included in the Cable Kit, spare part number 742103-001. See

Cable Kit

on page 21

for more Cable Kit spare part information.

736889-001

Power button board

NOTE:

The power button board does not include the power button board cable. The power button board

cable is included in the Cable Kit, spare part number 742103-001. See

Cable Kit on page 21

for more

Cable Kit spare part information.

736890-001

Proximity sensor module

NOTE:

The proximity sensor module does not include the proximity sensor module cable. The proximity

sensor module cable is included in the Cable Kit, spare part number 742103-001. See

Cable Kit

on page 21

for more Cable Kit spare part information.

736891-001

Card reader board for use only on computer models not equipped with WWAN capability (includes micro

SD Card Reader slot)

Sequential part number listing

Summary of Contents for Spectre 13x2 Pro








































































































Search results

Summary of Contents for Spectre 13x2 Pro

Reviews:

Related manuals for Spectre 13x2 Pro

Brands by name

Popular brands

HP Spectre 13x2 Pro, Maintenance And Service Manual

Search results

Summary of Contents for Spectre 13x2 Pro

Reviews:

Related manuals for Spectre 13x2 Pro

Brands by name

Popular brands