Description
Spare part number
NOTE:
The NFC module does not include the NFC module cable. The NFC module cable is included in
the Cable Kit, spare part number 742103-001. See
Cable Kit on page 21
for more Cable Kit spare part
information.
Before removing the NFC module, follow these steps:
1.
Turn off the tablet. If you are unsure whether the tablet is off or in Hibernation, turn the tablet on, and
then shut it down through the operating system.
2.
Disconnect the power from the tablet by unplugging the power cord from the tablet.
3.
Disconnect all external devices from the tablet.
4.
Remove the back cover (see
Back cover on page 36
).
5.
Remove the tablet battery (see
Tablet battery on page 37
).
Remove the NFC module:
1.
Release the audio/power connector board ZIF connector
(1)
to which the NFC module cable is attached,
and then disconnect the NFC module cable from the audio/power connector board.
2.
Release the NFC module ZIF connector
(2)
to which the NFC antenna cable is attached, and then
disconnect the NFC antenna cable from the NFC module.
3.
Detach the NFC module
(3)
from the display assembly. (The NFC module is attached to the
display assembly with double-sided adhesive.)
4.
Remove the NFC module and cable.
Reverse this procedure to install the NFC module.
52
Chapter 5 Removal and replacement preliminary requirements
Summary of Contents for Spectre 13x2 Pro
Page 4: ...iv Safety warning notice ...
Page 8: ...viii ...
Page 53: ...Reverse this procedure to install the WWAN module Removal and replacement procedures 45 ...
Page 103: ......
