3.
Disconnect all external devices from the tablet.
4.
Remove the back cover (see
Back cover on page 36
).
WARNING!
To reduce potential safety issues, use only the battery provided with the tablet, a replacement
battery provided by HP, or a compatible battery purchased from HP.
CAUTION:
Removing a battery that is the sole power source for the tablet can cause loss of information. To
prevent loss of information, save your work or shut down the tablet through Windows before removing the
battery.
Remove the tablet battery:
1.
Remove the four Phillips PM2.0×3.0 screws
(1)
and the three Phillips PM2.0×2.5 broad head screws
(2)
that secure the battery to the display assembly.
2.
Release the battery
(3)
by lifting it and sliding it slightly to the left.
3.
Disconnect the battery cable
(4)
from the system board.
4.
Remove the tablet battery
(5)
.
Reverse this procedure to install the tablet battery.
Proximity sensor module
Description
Spare part number
Proximity sensor module
736890-001
NOTE:
The webcamera/microphone module does not include the webcamera/microphone module cable. The webcamera/
microphone module cable is included in the Cable Kit, spare part number 742103-001. See
Cable Kit on page 21
for more Cable Kit
spare part information.
38
Chapter 5 Removal and replacement preliminary requirements
Summary of Contents for Spectre 13x2 Pro
Page 4: ...iv Safety warning notice ...
Page 8: ...viii ...
Page 53: ...Reverse this procedure to install the WWAN module Removal and replacement procedures 45 ...
Page 103: ......
