Wireless antennas
Description
Spare part number
Antenna Kit (includes WLAN antenna cables and transceivers and WLAN antenna cables and
transceivers)
736879-001
Before removing the wireless antenna cables and transceivers, follow these steps:
1.
Turn off the tablet. If you are unsure whether the tablet is off or in Hibernation, turn the tablet on, and
then shut it down through the operating system.
2.
Disconnect the power from the tablet by unplugging the power cord from the tablet.
3.
Disconnect all external devices from the tablet.
4.
Remove the back cover (see
Back cover on page 36
), and then remove the following components:
a.
Tablet battery (see
Tablet battery on page 37
)
b.
Proximity sensor module (see
Proximity sensor module on page 38
)
c.
Webcamera/microphone module (see
Webcamera/microphone module on page 39
)
d.
WWAN module (see
WWAN module on page 44
)
e.
Volume button board (see
Volume button board on page 49
)
Remove the wireless antenna cables and transceivers:
1.
Disconnect the WLAN antenna cables
(1)
from the WLAN module.
2.
Release the wireless antenna cables from the retention clips
(2)
and routing channel built into the
display assembly.
60
Chapter 5 Removal and replacement preliminary requirements
Summary of Contents for Spectre 13x2 Pro
Page 4: ...iv Safety warning notice ...
Page 8: ...viii ...
Page 53: ...Reverse this procedure to install the WWAN module Removal and replacement procedures 45 ...
Page 103: ......
