Installing or Replacing the X.21 or V.35 Serial Card in the VPN Device
Hewlett-Packard VPN Server Appliance SA3110/SA3150/SA3400/SA3450 Installation Guide
6-5
Hewlett-Packard VPN Server Appliance SA3110/SA3150/
SA3400/SA3450 Installation Guide.
Restoring the
Restoring the
Restoring the
Restoring the
Configuration
Configuration
Configuration
Configuration
After you install or replace the X.21 or V.35 serial card in your
VPN device, you need to again create the basic configuration file
of the device.
To restore your advanced configuration settings that you saved
in your existing ISBR.cfg file, you need to open your old ISBR.cfg
file and copy and paste the sections you want to retain into your
newly created configuration in your Console window.
To create the new configuration file and restore the advanced
settings of your saved ISBR.cfg file:
1.
Follow the instructions in this
Hewlett-Packard VPN Server
Appliance SA3110/SA3150/SA3400/SA3450 Installation Guide
in Chapter 3 in the section entitled "Setting Up a Basic
Routing Mode Configuration on a New Device." Begin with
the subsection entitled "Establishing an Initial Session."
2.
Follow the instructions in the subsection entitled "Running
the Setup Script."
3.
Using a text editor such as Microsoft Notepad, open your
previously saved ISBR.cfg file.
4.
Copy and paste the sections of your old ISBR.cfg file that you
want to retain into your Console window.
This combines the advanced configuration settings of your
previous ISBR.cfg file with your newly created configuration
file.
Summary of Contents for sa3110
Page 2: ...ii ...
